SYNOXX

The SYNOXX EDSP5X-3 is a 56G SFP56 to SFP56 passive Direct Attach Copper (DAC) cable designed for high-speed short-distance network connections. Supporting data rates up to 56 Gbps over a 3-metre twinax copper cable, it is ideal for server-to-switch, storage, leaf-to-server, and adjacent-rack connections. The cable uses PAM4 signaling, supports hot-pluggable SFP56 interfaces, and provides a low-power, low-latency, cost-effective alternative to optical transceivers for short-reach 56G Ethernet deployments.

The SYNOXX ES-T5-R-3 is a 10GBase-T SFP+ copper transceiver supporting 
multi-rate 10G/5G/2.5G/1G Ethernet over RJ45, with a 30m reach on Cat 6a/7 
cable. Hot-pluggable, RoHS compliant, and IC certified for Canada and the US.

The SYNOXX EB23X-10D/EB32X-10D is a matched 10G SFP+ BiDi transceiver pair enabling 
bidirectional 10Gbps transmission over a single strand of single-mode fiber up to 10km, 
using complementary wavelengths of 1270nm TX/1330nm RX and 1330nm TX/1270nm RX. 
Supports data rates up to 10Gbps with Digital Diagnostic Monitoring (DDM), DFB 
transmitter, APD receiver, and power consumption of ≤1.5W per module, compliant with 
IEEE 802.3ae and SFP+ MSA standards. Hot-pluggable, RoHS compliant, and IC Certified.

The SYNOXX ESP852X-01D is a 25G SFP28 SR optical transceiver delivering 25.78Gbps 
transmission over multimode fiber — up to 100m on OM4, 70m on OM3, and 20m on OM2 
— using an 850nm VCSEL laser and PIN photodiode, purpose-built for high-density 25G 
Ethernet switching, 5G CPRI fronthaul, and 100G breakout target deployments. 
Features a hot-pluggable SFP28 form factor, LC duplex connector, and Digital 
Diagnostic Monitoring (DDM) via SFF-8472, with low power consumption and compliance 
with IEEE 802.3cc and SFF-8402 standards. Hot-pluggable, RoHS compliant, and IC 
Certified.

High-performance 25G SFP28 to SFP28 direct attach copper cable designed for short-range connectivity up to 3 meters, offering low power consumption and excellent signal integrity.

High-speed 100G QSFP28 to QSFP28 DAC cable, SFF-8636 compliant, IEEE 802.3bj support, low power consumption, excellent signal integrity.

The SYNOXX EDQPY-1 is a 100G QSFP28 to QSFP28 passive direct attach copper (DAC) 
cable delivering 100Gbps data transfers over a 1-metre twinax connection using a 
4×25G lane architecture — the ideal same-rack interconnect for 100G spine-leaf 
switching environments. Compliant with SFF-8636 and IEEE 802.3bj, featuring a 
two-wire I2C interface for monitoring and control, low crosstalk, and power 
consumption under 1.5W per end. Hot-pluggable, RoHS compliant, and IC Certified.

The SYNOXX EDSP2X-3 is a 25G SFP28 to SFP28 passive direct attach copper (DAC) 
cable delivering 25.78Gbps over a 3-metre twinax connection — purpose-built for 
adjacent-rack 25G connections where 1-metre cables fall short, including cross-rack 
leaf-to-server links, flexible cable management through overhead trays and 
under-floor pathways, and 100G breakout target deployments with extra slack. 
Compliant with SFP28 MSA, SFF-8402, and IEEE 802.3by, featuring a hot-pluggable 
SFP28 form factor, low power consumption, and a fully passive copper signal path 
with no active components. Hot-pluggable, RoHS compliant, and IC Certified.

The SYNOXX ESP31X-20D is a 10G SFP+ LR optical transceiver delivering 10Gbps data 
transmission over single-mode fiber (SMF) up to 20km using a 1310nm DFB laser 
transmitter and PIN photodetector receiver. Supports Digital Diagnostic Monitoring 
(DDM) for real-time parameter tracking, with under 1W power consumption, LC duplex 
connector, and compliance with SFF-8431, SFF-8432, SFF-8472, and IEEE 802.3ae 
standards. Hot-pluggable, RoHS compliant, and IC Certified for Canada and the US.

High-performance 25G SFP28 to SFP28 direct attach copper cable designed for short-range, high-speed connectivity. Supports up to 25.78Gbps with low power consumption and excellent EMI performance.