List of products by supplier MikroTik

The MikroTik ATL LTE18 kit is a high-performance outdoor LTE Category 18 router designed for demanding mobile broadband deployments where signal strength, stability, and throughput are critical. Built around a 64-bit ARM processor and powered by a Cat18 modem capable of up to 1.2 Gbps downlink and 150 Mbps uplink, it features 4×4 MIMO on the downlink with a suite of six integrated high-gain antennas — four covering the middle band (1.7–2.7 GHz) and two covering the low band (700 MHz–1 GHz, including LTE Band 28). Its distinctive aerodynamic enclosure is IP54-rated for outdoor use and engineered to shed snow and water in harsh weather. The unit is powered via a single 802.3af/at PoE input, ships with RouterOS v7.

The MikroTik FTC11XG is a weatherproof IP55 10 Gigabit fiber-to-copper media converter — 1× SFP+ 10G fiber input, 1× 10/100/1000/10G RJ45 Ethernet output, Marvell 88E6193 switch chip, SwitchOS Lite with VLAN, SNMP, ACL, and traffic shaping, 64 KB FLASH, dual power input (DC jack 18–57V, 802.3bt PoE-in 43–57V), passive cooling, IP55, -40°C to +70°C, MTBF ~200,000 hours at 25°C. CE, EAC, RoHS certified. Includes K-81 fastening set, 48V 0.95A power adapter, Gigabit PoE injector. The correct managed 10G fiber-to-copper converter for outdoor, ceiling-mount, and harsh-environment deployments where a 10G SFP+ fiber run must terminate to a 10G RJ45 device without a full switch layer, with VLAN, ACL, and SNMP management built in.

The MikroTik L23UGSR-5HaxD2HaxD is a modular, DIY-oriented dual-band Wi-Fi 6 RouterBOARD designed for building custom outdoor access points, CPE units, and point-to-point links. A spiritual successor to the popular RB922, it features a Qualcomm Maple ARM CPU, built-in dual-band dual-chain Wi-Fi 6 radio (2.4 GHz and 5 GHz), a 2.5G SFP port, Gigabit Ethernet, a miniPCIe slot, a Nano SIM slot, USB port, and four MMCX antenna connectors for full antenna customisation. Running RouterOS v7, it is a highly flexible platform for network professionals who want to design their own wireless solutions from the ground up.

The MikroTik FTC21 is a weatherproof IP55 Fiber-to-Copper media converter with smart management capabilities powered by SwOS Lite. It bridges a single SFP/SFP+ fiber port (with 2.5G support) to a Gigabit Ethernet copper port, and goes beyond simple media conversion by offering interface monitoring, VLAN support, SNMP reporting, basic traffic shaping, and advanced Access Control Lists. Housed in a passively cooled, outdoor-rated enclosure, it is suitable for both indoor and harsh outdoor deployments. The kit includes a PoE injector, 48V power adapter, and mounting hardware.

The MikroTik wAP LR8G Kit is a compact, weatherproof outdoor LoRa® gateway combining 868 MHz LoRa® connectivity, 2.4 GHz Wi-Fi, an integrated GPS chip, and a 10/100 Ethernet port in a durable, IP54-rated enclosure. Running RouterOS v7 and compatible with The Things Network, it is designed for easy deployment of wide-area IoT networks in demanding outdoor environments. The kit includes everything needed to get started, including a PoE injector, power adapter, mounting hardware, and an automotive power adapter cable.

The MikroTik G1040A-60WF is a 60W hot-swap replacement power supply unit designed for use with the CCR2004-16G-2S+, CRS510-8XS-2XQ-IN+, and CRS504-4XQ-IN. These units ship with two hot-swap dual-redundant power supplies as standard — and this kit allows you to replace a failed unit without powering down or restarting the router, ensuring zero downtime. It is an essential spare for network administrators and businesses where continuous uptime is critical.

The MikroTik OmniTIK 5 PoE ac (RBOmniTikPG-5HacD) is a significant upgrade to MikroTik's popular OmniTIK 5GHz access point line, combining an integrated 7.5 dBi omnidirectional antenna with 802.11ac (Wi-Fi 5) wireless performance in a weather-resistant outdoor enclosure. Built around a dual-chain 5GHz radio capable of up to 867 Mbit/s, it features five Gigabit Ethernet ports — four of which support 802.3af/at PoE output — making it ideal for powering additional devices directly from the unit. Running MikroTik's RouterOS, the OmniTIK 5 PoE ac suits network installers, ISPs, and enterprises looking for a versatile outdoor access point that also serves as a compact PoE distribution hub in a single, pole-mountable unit.

The wAP R is a compact, weatherproof 2.4GHz wireless access point featuring a miniPCI-e slot for custom LTE cards, LTE antennas, and multiple mounting options. Ideal for outdoor or mobile setups.

The MikroTik cAP LTE12 ax is a CAT12 LTE + dual-band Wi-Fi 6 ceiling access point delivering up to 600 Mbps LTE downlink and 150 Mbps uplink — paired with 574 Mbps at 2.4 GHz and 1,200 Mbps at 5 GHz via 802.11ax, on a quad-core ARM64 IPQ-6010 CPU at 1.8 GHz with 1 GB RAM. 802.3af/at PoE-in and passive PoE-out on Ether2 (22.8W), IP20, WPA3/OWE security, CAPsMAN-ready, RouterOS v7 License 4, -40°C to +50°C. Ceiling-mount design eliminates theft, obstruction, and cable clutter from the workspace. Includes 48V adapter, Gigabit PoE injector, K-81 fastening set, and cAP ax ceiling bracket. The correct single-device LTE + Wi-Fi 6 solution for pop-up businesses, food stands, festival operations, and high-traffic temporary venues.

The MikroTik wAP LTE kit (2024 revision) is a CAT4 outdoor LTE + 2.4 GHz Wi-Fi access point delivering up to 150 Mbps downlink and 50 Mbps uplink — in a tiny IP54-weatherproof enclosure rated from -40°C to +60°C, running RouterOS v7 on License 4. Three power inputs (DC jack, passive PoE-in, automotive plug — all 9–30V), anti-vandal wall mounting, and the newly added Band 28 (700 MHz) for improved rural coverage. Includes 24V adapter, PoE injector, K-52 fastening set, K-50 locking set, wAP mount, ceiling mount bracket, desktop stand, and automotive cable.  MikroTik's own positioning: the best outdoor LTE/Wi-Fi deal on the market for tight budgets — and the 2024 modem refresh makes that claim credible.